+1 (868) 658-3817 7 sales@aisltt.com

Products

Our range of products has grown over the years as we continue to meet the growing needs of the energy, construction and manufacturing industries among others.

Use the search function below to find what you need, or contact our team at sales@aisltt.com if you require more information. 

  • Green Pin®
  • William Hackett
  • Load Monitoring Systems
  • Synthetic Lift Slings
  • Wire Rope Slings to BS EN 13414-1
  • Polypropylene Rope
Green Pin® Sling Hook E
The Green Pin® Sling Hook E is a grade 10 eye sling hook. The sling hook can be used for general lifting applications. It can be quickly connected to the load lifting points thanks to its easy operating latch, which guarantees full safety. To connect simply push the latch, connect the hook to the lifting point, and release the latch. The forged latch guarantees a longer lifespan. It strongly limits the risk that the operator uses the hook without latch. The latch is fitted with a stainless steel spring and a sturdy pin. The eye of the hook can be connected to grade 10 chain with a connecting link or an omega link, to a webbing with a web sling connector or to a wire rope with a thimble. The flat on the eye enables the assembly with an omega link or on a thimble. The Green Pin® Sling Hook E is available in a range to suit 6 mm up to 20 mm grade 10 chain.
0.00 $ 0.0 TTD
Green Pin® Snatch Block S
The Green Pin® Snatch Block S is a light-weight snatch block type 601S with a Green Pin® Shackle attached. The Green Pin® Snatch Block S has a smooth, uninterrupted pull due to conical roller bearings. Its coating ensures long-term durability, even under harsh conditions. The Green Pin® Snatch Block S is available in a range with a working load limit from 2 up to 30 ton.
0.00 $ 0.0 TTD
Green Pin® Weld-On Transport Ring
The Green Pin® Weld-On Transport Ring is a grade 8 weld-on transport ring. The base is forged from St 52-3 steel and the ring in 23MN. Welding must only be carried out by a qualified welder in accordance with DIN 8563 resp. 15429. The surfaces to be welded must be clean, without oil, grease or paint. Welding instructions are supplied with each delivery. The transport rings are delivered without springs. The Green Pin® Weld-On Transport Ring is available in a range with a working load limit from 1.2 t. up to 15.5 t.
0.00 $ 0.0 TTD
Green Pin® Wire Rope Clip
The Green Pin® Wire Rope Clip is a wire rope clip, generally to EN 13411-5 Type B. This wire rope clip is safer to work with as the ribs on the bearing surface of the clip prevent sliding of the wire rope. Furthermore, the wire rope clip is made from high tensile steel, while galvanization ensures its long-term durability. The Green Pin® Wire Rope Clip is available in a range for wire rope diameters up to 78 mm.
0.00 $ 0.0 TTD
HA MASTER LINKS OS+
The HA range of Grade 8 master links and quad assemblies are widely used for offshore rigging and lifting sets for containers and are the industry leaders globally based on the following: Product available in diameters from 16mm up to 120mm and working load limits from 4.1 tonnes to 250 tonnes, The links are manufactured from triple alloy steel in accordance with EN1677, which includes individually proof load tested to 2.5 times working load limit and 100% MPI, MPF (Manufacturing Proof Force): 2.5 x 9.81 x Working Load Limit (kN) (min.), Factor of Safety: 5 : 1, Operational temperature range is -40° C to + 200°C.
0.00 $ 0.0 TTD
HA QUAD ASSEMBLIES OS+
The HA range of Grade 8 master links and quad assemblies are widely used for offshore rigging and lifting sets for containers and are the industry leaders globally based on the following: Product available in diameters from 16mm up to 90mm and working load limits from 4.1 tonnes to 150 tonnes, The links are manufactured from triple alloy steel in accordance with EN1677, which includes individually proof load tested to 2.5 times working load limit and 100% MPI, MPF (Manufacturing Proof Force): 2.5 x 9.81 x Working Load Limit (kN) (min.), BF (Break Force): WLL x Factor of Safety, WLL (Working Load Limit) (tonne) @ 45° to vertical, Factor of Safety: 5 : 1.
0.00 $ 0.0 TTD
Load Links
Suitable for all industry sectors including marine, offshore
and subsea.Due to the robust, lightweight high tensile aluminum
design these load links are Ideal for mobile applications and
available as either cabled or wireless with a range of options.
0.00 $ 0.0 TTD
Load Pin Shackles
Ideal for precise tensile load monitoring for your lifting, static, pulling or weighing applications. Suitable for all industry sectors including marine, onshore, offshore and subsea. You can be confident each shackle and load pin is up to the task with the certified load test before delivery.
0.00 $ 0.0 TTD
Load Pins
Load pins are integrated in mechanical structures and mechanisms
to provide precise load monitoring accurate to 1%, safety factor of 5:1
and all proof loaded to 150%
0.00 $ 0.0 TTD
0.00 $ 0.0 TTD
Ratched Loadbinder BS EN 12195-3
Conforms to BS EN 12195-3. Ratchet loadbinder with winged grab hook and safety pin device. Used for tensioning chain in lashing applications. Grab hooks supplied with safety pin locking device to enhance operational safety. MBL equals 2 x lashing capacity.
0.00 $ 0.0 TTD
Running Line Tensiometer
Monitor speed, payout for wire rope, synthetic rope, dynema, fibre optic and cable systems in marine, offshore, onshore and subsea applications.
0.00 $ 0.0 TTD
0.00 $ 0.0 TTD
WH AT Adjustable Trolley
The WH AT Adjustable Push Trolley features a light weight robust construction, allowing quick and effective installation onto various beams and girders. The adjustable trolley is fitted with wheel guard anti-drop plates and precision ball bearing wheels allowing easy movement along the beam. It adapts to the beam width by turning the adjustable bar and is fitted with a locking mechanism for ensuring secure clamping to the beam. W.L.L. capacities of 2.0 tonnes, 3.2 tonnes and 6.0 tonnes are available and the trolleys are designed to accommodate a range of beam widths.
0.00 $ 0.0 TTD
WH BC Fixed Jaw Super Clamp
The WH BC fixed jaw super clamp is fitted with a 'gussett' in both jaws of the beam clamp maximising contact between the beam and beam clamp increasing the grip of the beam clamp. A shackle is fitted to the bottom of the beam clamp allowing an easy connection of the hoist to be attached. This fixed jaw super clamp can be used to an angle of 45° to the vertical. When the angle is moved away from the vertical the working load limit of the beam clamp needs to be reduced.
0.00 $ 0.0 TTD
WH C4 Chain Hoist
The design and specification of the William Hackett WH C4 chain hoist includes: WORKING LOAD LIMIT RANGE: 500kg to 50 tonnes, LIGHT LOAD CAPABILITY: the WH C4 is tested and certified at 2% of the chain hoist rated capacity, TWIN PAWL: double safety; fitted as standard, SAFETY LATCHES: the WH C4 chain hoist top and bottom hooks are fitted with heavy duty cast steel latches. The latch and hook tip are integrated creating a strong and robust hook closure, OVERLOAD INDICATOR MARKS: WH C4 chain block top and bottom hooks have, as part of the hook forging, overload indicator marks either side of the hook throat. By measuring the distance between the indicator marks, the hook can be quickly and easily checked to see if any stretch has occurred due to misuse or overloading, HAND CHAIN JOINER: a unique hand chain joiner is used as a quick and secure method of joining the hand chain without the need to cut, bend, open and close a link of existing hand chain, HOOK HOUSING: the WH C4 chain hoist top and bottom hook housing are secured with socket head cap screws/hex head bolts and nyloc insert locking nuts, FLEETING/CROSS HAULING: the WH C4 chain hoist is tested and certified for fleeting or cross hauling applications up to 45° from the vertical without deration, LOAD CHAIN: WH-C4 chain blocks are fitted with load chain that fully complies with international standard BS EN818-7 Grade T (8).
0.00 $ 0.0 TTD
WH L4 Lever Hoist
The design and specification of the William Hackett WH-L4 lever hoist includes: WORKING LOAD LIMIT RANGE: 800kg to 20 tonnes, LIGHT LOAD CAPABILITY: the WH L4 is tested and certified at 2% of the lever hoist rated capacity, TWIN PAWL: double safety; fitted as standard, SAFETY LATCHES: the WH L4 lever hoist top and bottom hooks are fitted with heavy duty cast steel latches. The latch and hook tips are integrated creating a strong and robust hook closure, OVERLOAD INDICATOR MARKS: the WH L4 lever hoist, TOP AND BOTTOM HOOKS have, as part of the hook forging, overload indicator marks either side of the hook throat. By measuring the distance between the indicator marks, the hook can be quickly and easily checked to see if any stretch has occurred due to misuse or overloading, HOOK HOUSING: the WH L4 lever hoist top and bottom hook housings are secured with socket head cap screws/hex head bolts and nyloc locking nuts, FLEETING/CROSS HAULING: the WH L4 lever hoists are tested and certified for fleeting or cross hauling applications up to 45° from the vertical without deration, LOAD CHAIN: the WH L4 lever hoists are fitted with load chain that fully complies with international standard BS EN818-7 Grade T (8), PROOF TESTED: every hoist is proof tested to 1.5 times the Working Load Limit.
0.00 $ 0.0 TTD
WH UBC Universal Beam Clamp
The William Hackett Universal Beam Clamp has been designed not only for vertical use, but also for side load applications, where conventional clamps are not suitable. The Universal Beam Clamp is suitable for pulling and lifting at angles across the beam or as a semi-permanent anchor point. It can be loaded at any angle and eliminates the use of spreader beams in various lifting operations. Fitted with an adjustable locking mechanism, ensuring secure clamping to the beam. Built-in suspension point for low headroom design. Lightweight design allowing for quick clamping and unclamping. W.L.L. capacities available at 2.0 tonnes, 3.2 tonnes, 5.0 tonnes and 10.0 tonnes extra wide designed to accommodate a range of beam widths and thicknesses.
0.00 $ 0.0 TTD